Автор Anatoly Zak, 26.05.2011 08:53:55
0 Пользователей и 1 гость просматривают эту тему.
Цитата NASA's OSIRIS-REx @OSIRISREx 15 сTOUCHDOWN! Sampling in progress #ToBennuAndBackhttps://video.twimg.com/ext_tw_video/1318674329106862081/pu/vid/1280x720/0K0gq5rUodyYyy2N.mp4 (0:10)
Цитата NASA's OSIRIS-REx @OSIRISREx 1 минThe back-away burn is complete I'm now moving to a safe distance away from Bennu.https://video.twimg.com/ext_tw_video/1318675590191435778/pu/vid/1280x720/w0inlGty_X-mKQpH.mp4 (0:06)
Цитата NASA's OSIRIS-REx @OSIRISREx 1 мин. назадOCAMS, OTES, and the navigation cameras should now be powered OFF. In a bit, I'll put the TAGSAM arm back in its parked position
Цитата NASA @NASA 4 мин. назад"We're going in." "Touchdown declared. Sampling is in progress." @OSIRISREx touched the surface of asteroid Bennu to capture rocks & dust with its robotic arm. After this brief TAG (Touch-And-Go maneuver), it will fire thrusters to back away to a safe distance. #ToBennuAndBackhttps://video.twimg.com/amplify_video/1318676680160931840/vid/1280x720/OxMCzL726R-xxsJw.mp4 (0:27)
Цитата NASA's OSIRIS-REx @OSIRISREx 2 мин. назадPreliminary data show that today's sample collection event went as planned More details to come once all the data from the event are downlinked to Earth. Thanks, everybody, for following along as we journey #ToBennuAndBack!Next stop: Earth 2023!
ЦитатаWatch NASA's OSIRIS-REx Spacecraft Attempt to Capture a Sample of Asteroid Bennu NASAТрансляция началась 94 минуты назад
Цитата10/21/2020 01:44 Stephen ClarkWith OSIRIS-REx now climbing away from asteroid Bennu and heading back into orbit, ground teams will have to wait until later tonight before getting more details about how today's touch and go sampling attempt went."The pyro bottles fired," said Dante Lauretta, OSIRIS-REx's principal investigator from the University of Arizona. "TAGSAM operated, the back-away thrusters fired, so we're safely moving away from the asteroid surface. The spacecraft did everything it was supposed to do. So we did it. We tagged the surface of the asteroid."I can tell you that everything went just exactly perfect, which is kind of the hallmark of this team," Lauretta said on NASA TV's broadcast of the mission's touch and go landing on asteroid Bennu. "We have consistently beaten expectations over and over again. We have overcome the amazing challenges that this asteroid has thrown at us, and the spacecraft appears to have operated flawlessly. We made it down to the asteroid surface. We were in contact. The gas bottles fired."We don't know how long were in contact yet," Lauretta continued. "That's some reconstructed information that we're going to have to put together over the next few hours as the data come in. We backed away successfully from the asteroid surface. The team is exuberant back there. Emotions are high. Everybody is really proud, and we have some work to do to determine how much sample that we have collected."The next thing that I'm going to be looking for is once the spacecraft cools off ... It probably got pretty warm as it approached the asteroid surface, so it needs to get rid of some of that excess heat. It's got to get those solar arrays back onto the sun and get power positive. Once it's stabilized, it's going to point that high gain antenna at the Earth, and we're going to start bringing that data back."Ground teams are eager to see pictures captured by SAMCAM, a close-range camera designed to monitor of the sampling maneuver and image the sampling head after OSIRIS-REx backed away from the asteroid."Those SAMCAM images are going to tell us an enormous amount of information about how the events of today went," Lauretta said. "We're going to be looking at a whole series of images as we descended down to the surface, made contact, fired that gas bottle, and I really want to know how that surface responded."We haven't done this before, so this is new territory for us, and the whole science team, I know, is really looking forward to that information," he said. "For one thing, it'll tell us the likelihood of sample collection, kind of a probabilistic assessment. There will probably be a lot of science that comes out of that as well."NASA plans to release images from the sampling attempt tomorrow, once the pictures are beamed back to Earth and processed.On Saturday, controllers are scheduled to command OSIRIS-REx into a spin maneuver to measure its moment of inertia. Engineers will compare the results to a similar maneuver before the sampling run, yielding an estimate of how much mass the spacecraft grabbed from Bennu.The mission's requirement was to retrieve at least 2.1 ounces, or 60 grams, of material from the asteroid. But scientists hoped OSIRIS-REx could collect much more, perhaps as much as 4.4 pounds, or 2 kilograms, of pebbles and dust grains.If managers are satisfied OSIRIS-REx has gathered at least 60 grams of samples, NASA will call it a success and prepare the spacecraft to begin its return journey to Earth next year. If not, the spacecraft could try another touch and go landing as soon as January to snatch up more asteroid material.OSIRIS-REx is scheduled to release its return capsule to land back on Earth on Sept. 24, 2023."Kudos to the team," Lauretta said. "It's an amazing experience. History was made tonight."
ЦитатаOctober 20, 2020 RELEASE 20-103NASA's OSIRIS-REx Spacecraft Successfully Touches AsteroidNASA's Origins, Spectral Interpretation, Resource Identification, Security, Regolith Explorer (OSIRIS-REx) spacecraft unfurled its robotic arm Tuesday, and in a first for the agency, briefly touched an asteroid to collect dust and pebbles from the surface for delivery to Earth in 2023.This well-preserved, ancient asteroid, known as Bennu, is currently more than 200 million miles (321 million kilometers) from Earth. Bennu offers scientists a window into the early solar system as it was first taking shape billions of years ago and flinging ingredients that could have helped seed life on Earth. If Tuesday's sample collection event, known as "Touch-And-Go" (TAG), provided enough of a sample, mission teams will command the spacecraft to begin stowing the precious primordial cargo to begin its journey back to Earth in March 2021. Otherwise, they will prepare for another attempt in January."This amazing first for NASA demonstrates how an incredible team from across the country came together and persevered through incredible challenges to expand the boundaries of knowledge," said NASA Administrator Jim Bridenstine. "Our industry, academic, and international partners have made it possible to hold a piece of the most ancient solar system in our hands."At 1:50 p.m. EDT, OSIRIS-REx fired its thrusters to nudge itself out of orbit around Bennu. It extended the shoulder, then elbow, then wrist of its 11-foot (3.35-meter) sampling arm, known as the Touch-And-Go Sample Acquisition Mechanism (TAGSAM), and transited across Bennu while descending about a half-mile (805 meters) toward the surface. After a four-hour descent, at an altitude of approximately 410 feet (125 meters), the spacecraft executed the "Checkpoint" burn, the first of two maneuvers to allow it to precisely target the sample collection site, known as "Nightingale."Ten minutes later, the spacecraft fired its thrusters for the second "Matchpoint" burn to slow its descent and match the asteroid's rotation at the time of contact. It then continued a treacherous, 11-minute coast past a boulder the size of a two-story building, nicknamed "Mount Doom," to touch down in a clear spot in a crater on Bennu's northern hemisphere. The size of a small parking lot, the site Nightingale site is one of the few relatively clear spots on this unexpectedly boulder-covered space rock."This was an incredible feat - and today we've advanced both science and engineering and our prospects for future missions to study these mysterious ancient storytellers of the solar system," said Thomas Zurbuchen, associate administrator for NASA's Science Mission Directorate at the agency's headquarters in Washington. "A piece of primordial rock that has witnessed our solar system's entire history may now be ready to come home for generations of scientific discovery, and we can't wait to see what comes next.""After over a decade of planning, the team is overjoyed at the success of today's sampling attempt," said Dante Lauretta, OSIRIS-REx principal investigator at the University of Arizona in Tucson. "Even though we have some work ahead of us to determine the outcome of the event - the successful contact, the TAGSAM gas firing, and back-away from Bennu are major accomplishments for the team. I look forward to analyzing the data to determine the mass of sample collected."All spacecraft telemetry data indicates the TAG event executed as expected. However, it will take about a week for the OSIRIS-REx team to confirm how much sample the spacecraft collected.Real-time data indicates the TAGSAM successfully contacted the surface and fired a burst of nitrogen gas. The gas should have stirred up dust and pebbles on Bennu's surface, some of which should have been captured in the TAGSAM sample collection head. OSIRIS-REx engineers also confirmed that shortly after the spacecraft made contact with the surface, it fired its thrusters and safely backed away from Bennu."Today's TAG maneuver was historic," said Lori Glaze, Planetary Science Division director at NASA Headquarters in Washington. "The fact that we safely and successfully touched the surface of Bennu, in addition to all the other milestones this mission has already achieved, is a testament to the living spirit of exploration that continues to uncover the secrets of the solar system.""It's hard to put into words how exciting it was to receive confirmation that the spacecraft successfully touched the surface and fired one of the gas bottles," said Michael Moreau, OSIRIS-REx deputy project manager at NASA's Goddard Space Flight Center in Greenbelt, Maryland. "The team can't wait to receive the imagery from the TAG event late tonight and see how the surface of Bennu responded to the TAG event."The spacecraft carried out TAG autonomously, with pre-programmed instructions from engineers on Earth. Now, the OSIRIS-REx team will begin to assess whether the spacecraft grabbed any material, and, if so, how much; the goal is at least 60 grams, which is roughly equivalent to a full-size candy bar.OSIRIS-REx engineers and scientists will use several techniques to identify and measure the sample remotely. First, they'll compare images of the Nightingale site before and after TAG to see how much surface material moved around in response to the burst of gas."Our first indication of whether we were successful in collecting a sample will come on October 21 when we downlink the back-away movie from the spacecraft," Moreau said. "If TAG made a significant disturbance of the surface, we likely collected a lot of material."Next, the team will try to determine the amount of sample collected. One method involves taking pictures of the TAGSAM head with a camera known as SamCam, which is devoted to documenting the sample-collection process and determining whether dust and rocks made it into the collector head. One indirect indication will be the amount of dust found around the sample collector head. OSIRIS-REx engineers also will attempt to snap photos that could, given the right lighting conditions, show the inside of the head so engineers can look for evidence of sample inside of it.A couple of days after the SamCam images are analyzed, the spacecraft will attempt yet another method to measure the mass of the sample collected by determining the change in the spacecraft's "moment of inertia," a phrase that describes how mass is distributed and how it affects the rotation of the body around a central axis. This maneuver entails extending the TAGSAM arm out to the side of the spacecraft and slowly spinning the spacecraft about an axis perpendicular to the arm. This technique is analogous to a person spinning with one arm extended while holding a string with a ball attached to the end. The person can sense the mass of the ball by the tension in the string. Having performed this maneuver before TAG, and now after, engineers can measure the change in the mass of the collection head as a result of the sample inside."We will use the combination of data from TAG and the post-TAG images and mass measurement to assess our confidence that we have collected at least 60 grams of sample," said Rich Burns, OSIRIS-REx project manager at Goddard. "If our confidence is high, we'll make the decision to stow the sample on October 30." To store the sample, engineers will command the robotic arm to place the sample collector head into the Sample Return Capsule (SRC), located in the body of the spacecraft. The sample arm will then retract to the side of the spacecraft for the final time, the SRC will close, and the spacecraft will prepare for its departure from Bennu in March 2021 -- this is the next time Bennu will be properly aligned with Earth for the most fuel-efficient return flight.If, however, it turns out that the spacecraft did not collect enough sample at Nightingale, it will attempt another TAG maneuver on Jan. 12, 2021. If that occurs, it will touch down at the backup site called "Osprey," which is another relatively boulder-free area inside a crater near Bennu's equator.OSIRIS-REx launched from Cape Canaveral Air Force Station in Florida Sept. 8, 2016. It arrived at Bennu Dec. 3, 2018, and began orbiting the asteroid for the first time on Dec. 31, 2018. The spacecraft is scheduled to return to Earth Sept. 24, 2023, when it will parachute the SRC into Utah's west desert where scientists will be waiting to collect it.Goddard provides overall mission management, systems engineering and the safety and mission assurance for OSIRIS-REx. Dante Lauretta of the University of Arizona, Tucson, is the principal investigator, and the University of Arizona also leads the science team and the mission's science observation planning and data processing. Lockheed Martin Space in Denver built the spacecraft and is providing flight operations. Goddard and KinetX Aerospace are responsible for navigating the OSIRIS-REx spacecraft. OSIRIS-REx is the third mission in NASA's New Frontiers Program, which is managed by NASA's Marshall Space Flight Center in Huntsville, Alabama, for the agency's Science Mission Directorate in Washington.For more information on OSIRIS-REx:https://www.nasa.gov/osiris-rexandhttps://www.asteroidmission.org-end-
Цитата21 ОКТ, 01:26 Обновлено 01:55Зонд OSIRIS-REx осуществил операцию по забору грунта с поверхности астероида БеннуО том, насколько успешной была операция, станет известно спустя несколько часовНЬЮ-ЙОРК, 21 октября. /ТАСС/. Космический зонд OSIRIS-REx на скорости 10 см в секунду сблизился с астероидом Бенну для забора образца грунта. Информация об операции доступна на сайте Национального управления по аэронавтике и исследованию космического пространства (NASA). Операция осуществляется в автоматическом режиме, поскольку сигнал с Земли до зонда, находящегося на расстоянии около 320 млн км, идет 18,5 минуты.Цитата"Забор грунта осуществляется", - сообщило NASA в Twitter во вторник в 18:12 по времени восточного побережья США (01:12 мск среды).Согласно программе полета, штанга со специальным устройством для забора образца грунта должна коснуться поверхности астероида всего на 16 секунд. В этот момент одна из трех находящихся на штанге капсул с азотом выбросила облако сжатого газа, под воздействием которого частицы грунта диаметром около 2 см должны подняться и осесть на внутренней поверхности устройства. Операция осуществляется в заранее выбранной точке, получившей обозначение "Найтингейл", - это кратер диаметром около 20 метров в северной части астероида. Диаметр всего астероида достигает 500 метров.О том, насколько успешной была операция, станет известно спустя несколько часов. Как пояснили эксперты NASA, зонд должен будет отойти от астероида и развернуть солнечные батареи. После этого штанга манипулятора с устройством для забора образцов будет подведена к бортовой видеокамере и можно будет определить, какое количество грунта удалось собрать.Эксперты рассчитывают, что удастся собрать по крайней мере 60 грамм грунта. В случае если первая попытка забора грунта будет неудачной, позднее будет предпринята вторая. Капсулу с собранным грунтом планируется доставить на Землю в 2023 году. Скрытый текст: Станция OSIRIS-REx была запущена в космос в сентябре 2016 года в рамках миссии по сближению с астероидом Бенну (1999 RQ36) и сбору образцов с его поверхности. Она достигла небесного тела в начале декабря 2018 года и осуществила съемку всей поверхности астероида. Как отмечается на сайте NASA, астероид Бенну относится к категории потенциально опасных: шансы на то, что он в следующем веке может упасть на Землю, оцениваются как 1 к 2700.
Цитата"Забор грунта осуществляется", - сообщило NASA в Twitter во вторник в 18:12 по времени восточного побережья США (01:12 мск среды).
Цитата Michael Greshko @michaelgreshko 11 ч. назадNEW: @OSIRISREx engineers say that the spacecraft touched down 74 cm from the center of its target TAG region, more than 200 million miles from Earth. Truly staggering accuracy
Цитата NASA's OSIRIS-REx @OSIRISREx 14 мин. назадSee the video from yesterday's TAG event -- NASA's first asteroid sample collection attempt! Tune in TODAY at 5 pm EDT here: http://nasa.gov/nasalivehttps://video.twimg.com/ext_tw_video/1319005008000700420/pu/vid/1280x720/yczDQtZYn72gVomq.mp4 (0:15)
Цитата Thomas Zurbuchen @Dr_ThomasZ 21 мин. назад Never-before-seen images from our journey #ToBennuAndBackYesterday, @OSIRISREx captured these pics showing the spacecraft touch Bennu, press into its surface & stir up material. The team is busy analyzing what's likely to be NASA's 1st asteroid sample: https://go.nasa.gov/34gnGIKhttps://video.twimg.com/amplify_video/1319015709591044096/vid/720x720/4YxjbiwuOX-wtS_v.mp4 (0:08)
ЦитатаOSIRIS-REx Sample Collection at Asteroid Bennu: SamCam View of TAGSAM NASA Video21 окт. 2020 г.Captured on Oct. 20, during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of 82 images shows the SamCam imager's field of view as the NASA spacecraft approaches and touches down on asteroid Bennu's surface. The sampling event brought the spacecraft all the way down to sample site Nightingale, and the team on Earth received confirmation of successful touchdown at 6:08 pm EDT. Preliminary data show the sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.
ЦитатаOSIRIS-REx Aftermath of Sample Collection at Asteroid Bennu: SamCam View NASA Video21 окт. 2020 г.Captured on Oct. 20 during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of 16 images shows the SamCam imager's field of view as the NASA spacecraft backs away from asteroid Bennu's surface after touching down. The sampling event brought the spacecraft all the way down to sample site Nightingale, and the team on Earth received confirmation of successful touchdown at 6:08 pm EDT. Preliminary data show the sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.
ЦитатаOct. 22, 2020OSIRIS-REx TAGs Surface of Asteroid BennuCaptured on Oct. 20, 2020 during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of images shows the SamCam imager's field of view as the NASA spacecraft approaches and touches down on asteroid Bennu's surface, over 200 million miles (321 million km) away from Earth. The sampling event brought the spacecraft all the way down to sample site Nightingale, touching down within three feet (one meter) of the targeted location. The team on Earth received confirmation at 6:08 p.m. EDT that successful touchdown occurred. Preliminary data show the one-foot-wide (0.3-meter-wide) sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.youtu.be/LJBv4reH9IUCaptured on Oct. 20, during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of 82 images shows the SamCam imager's field of view as the NASA spacecraft approaches and touches down on asteroid Bennu's surface. The sampling event brought the spacecraft all the way down to sample site Nightingale, and the team on Earth received confirmation of successful touchdown at 6:08 p.m. EDT. Preliminary data show the sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.Credits: NASA/Goddard/University of ArizonaDownload full-resolution versions of related multimedia at NASA Goddard's Scientific Visualization StudioThe spacecraft's sampling arm - called the Touch-And-Go Sample Acquisition Mechanism (TAGSAM) - is visible in the lower part of the frame. The round head at the end of TAGSAM is the only part of OSIRIS-REx that contacted the surface during the sample collection event. In the middle of the image sequence, the sampling head positions itself to contact the asteroid's surface head-on. Shortly after, the sampling head impacts site Nightingale and penetrates Bennu's regolith. Upon initial contact, the TAGSAM head appears to crush some of the porous rocks underneath it. One second later, the spacecraft fires a nitrogen gas bottle, which mobilizes a substantial amount of the sample site's material. Preliminary data show the spacecraft spent approximately 5 of the 6 seconds of contact collecting surface material, and the majority of sample collection occurred within the first 3 seconds.Captured on Oct. 20 during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of 2 images shows the SamCam imager's field of view at the moment before and after the NASA spacecraft touched down on asteroid Bennu's surface. The sampling event brought the spacecraft all the way down to sample site Nightingale, and the team on Earth received confirmation of successful touchdown at 6:08 p.m. EDT. Preliminary data show the sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.Credits: NASA/Goddard/University of ArizonaDownload full-resolution versions of related multimedia at NASA Goddard's Scientific Visualization StudioThe TAGSAM is designed to catch the agitated surface material, and the mission team will assess the amount of material collected through various spacecraft activities. After touchdown, the spacecraft fired its thrusters to back away from Bennu. As expected, this maneuver also disturbed the Nightingale site, and loose debris is visible near the end of the image sequence. Preliminary telemetry shows the spacecraft remains in good health. The spacecraft was traveling at 0.2 mph (10 cm/sec) when it contacted sample site Nightingale and then backed away at 0.9 mph (40 cm/sec).These images were captured over approximately a five-minute period. The imaging sequence begins at about 82 feet (25 meters) above the surface, and runs through the back-away maneuver, with the last image in the sequence taken at approximately 43 feet (13 meters) in altitude - about 35 seconds after backing away. The sequence was created using 82 SamCam images, with 1.25 seconds between frames. For context, the images are oriented with Bennu's west at the top.youtu.be/LA6X3Yz-VkcCaptured on Oct. 20 during the OSIRIS-REx mission's Touch-And-Go (TAG) sample collection event, this series of 16 images shows the SamCam imager's field of view as the NASA spacecraft backs away from asteroid Bennu's surface after touching down. The sampling event brought the spacecraft all the way down to sample site Nightingale, and the team on Earth received confirmation of successful touchdown at 6:08 p.m. EDT. Preliminary data show the sampling head touched Bennu's surface for approximately 6 seconds, after which the spacecraft performed a back-away burn.Credits: NASA/Goddard/University of ArizonaView as animated GIFDownload full-resolution versions of related multimedia at NASA Goddard's Scientific Visualization StudioBy Brittany EnosUniversity of ArizonaLast Updated: Oct. 22, 2020Editor: Rob Garner
Цитата NASA's OSIRIS-REx @OSIRISREx 48 мин. назадPreliminary telemetry shows this is where I touched down on site Nightingale - within 3 feet (1 meter) of the targeted location Not too bad for being 200 million miles away
ЦитатаOSIRIS-REx Asteroid Sample Collection Recap and First Images NASAТрансляция началась 74 минуты назадMore than we could have ever imagined... Yesterday, Oct. 20, our OSIRIS-REx spacecraft descended to the surface of asteroid Bennu, touched down and attempted to capture a sample using a "Touch-And-Go," or TAG, maneuver. Join us at 5 p.m. EDT for a live broadcast with the mission team, as they provide a recap of yesterday's journey #ToBennuAndBack and reveal first images and videos of this historic event.