теплозащитных покрытий

Автор DonPMitchell, 25.12.2009 20:10:25

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

DonPMitchell

What was used on the early R-7 warhead?  I find a few sources, which do not seem to agree.

"Наиболее подходящим для наконечника и боковой поверхности ГЧ а то время был признан материал на основе кремнезема с органическим связующим - бакелитом. ...
Но тогда уже под руководством А. Северова, В. Бурлуцкого и В. Никулиной велся поиск защитного покрытия другого вида - асботекстолитового на органическом связующем. Головные части для последующих двух летных испытаний были изготовлены именно с его использованием. В конструкцию же наконечников изменения не вносились."
  - Ракетно-космическая корпорация "Энергия" им. С.П. Королева. 1946-1996


R-5RD: "... испытаны также головные части с покрытием теплоизоляционной обмазкой на основе карбида кремния — ТО-2 (на трех ракетах) и с покрытием из асботекстолита (на двух ракетах). Работы выполнялись в интересах создания СУ для ракеты Р-7 ..."
  - Решение «проблемы №1», Прудников И.С.,


"The coating was made of two layers of asbestos cloth on an asbotextolite base and impregnated with Bakelite.  We called the coating material TO-2."
  - Roads to Space,  I.S. Prudnikov

There seems to be disagreement about what is TO-2.  But "Roads to Space" is known to be a poor translation of "Дороги в космос".  Is Дороги в космос online someplace?

Was the warhead tip silica in bakelite (or maybe silicon carbide in bakelite)?  Everyone seems to agree the sides were made from asbestos textolite.  I am assuming that the materials used in R-7 were the same as those tested on R-5RD.
Never send a human to do a machine's job. -- Agent Smith

Pit

ЦитироватьWhat was used on the early R-7 warhead?  

I guess this may help:
http://cosmopark.ru/r7/tzp2.htm

DonPMitchell

Цитировать
ЦитироватьWhat was used on the early R-7 warhead?  

I guess this may help:
http://cosmopark.ru/r7/tzp2.htm

Thanks, that is an interesting bit of history.  But I think he is talking about early studies at NII-4 on evaporative heat shields.  The R-5 shield was some kind of sublimating clay-based material, and the R-7 shield was an ablative shield.

I wish I could find Дороги в космос online someplace.
Never send a human to do a machine's job. -- Agent Smith