Cygnus NG-12 (CRS-12), ELaNa 25A, +... – Antares-230+ – MARS LP-0A – 02.11.2019, 13:59:47 UTC

Автор tnt22, 11.09.2019 14:35:27

« назад - далее »

0 Пользователи и 1 гость просматривают эту тему.

tnt22

https://www.nasa.gov/press-release/nasa-invites-media-to-northrop-grumman-s-space-station-launch-from-virginia
ЦитироватьSept. 10, 2019
MEDIA ADVISORY M19-096

NASA Invites Media to Northrop Grumman's Space Station Launch from Virginia


The Alpha Magnetic Spectrometer-02 (AMS-02) as seen from the International Space Station
Credits: NASA

Media accreditation is open for the launch of Northrop Grumman's 12th commercial resupply services mission aboard its Cygnus spacecraft to deliver NASA science investigations, supplies, and equipment to the International Space Station.

Northrop Grumman is targeting liftoff of its Antares rocket for no earlier than 2:39 p.m. EDT Oct. 21 from the Mid-Atlantic Regional Spaceport's Pad-0A at NASA's Wallops Flight Facility on Wallops Island in Virginia. This is the first mission under Northrop's Commercial Resupply Services-2 contract with NASA.
...
Each resupply mission to the station delivers scientific investigations in the areas of biology and biotechnology, Earth and space science, physical sciences, and technology development and demonstrations.

Highlights of space station research that will be facilitated by research aboard this Cygnus mission include:
    [/li]
  • The Alpha Magnetic Spectrometer-02 (AMS-02), mounted on the exterior of the International Space Station, looks for evidence of dark, strange and anti-matter to help us understand how our universe was formed. A series of spacewalks are planned for later this year to prolong the operational life of the AMS-02. Astronauts will cut and reconnect fluid lines, a feat not done before in space, which could prove valuable for future missions at NASA's upcoming lunar Gateway or missions to Mars.
  • The AstroRad Vest tests a special vest designed to protect astronauts from radiation caused by unpredictable solar particle events. Astronauts will provide input on the garment as they wear it while performing daily tasks, including how easy it is to put on, how it fits and feels, and the range of motion it allows. Garment developers can use this input to improve design. Use of the vest could protect crew members on missions to the Moon and Mars.
  • The Zero-G Oven examines heat transfer properties and the process of baking food in microgravity. It uses an oven designed specifically for use aboard the space station, and may have application on future long-duration missions by offering a way to increase variety in flavor and nutrition of food for crew members.
  • The Made in Space Recycler will test systems needed to reprocess plastic into 3D printing filament that can then be transferred for use to the Made in Space Manufacturing Device, a 3D printer that has operated on the orbiting laboratory since 2016. This has implications for space conservation and deep space missions.
Northrop Grumman will use a new 24-hour late load capability on this mission. This innovative system includes a mobile clean room and a removable portion of the payload fairing that will permit time-sensitive science experiments to be loaded into Cygnus as late as 24 hours before liftoff.

Cargo resupply from U.S. companies ensures a national capability to deliver critical science research to the space station, significantly increasing NASA's ability to conduct new investigations at the only laboratory in space.

Get more information about Northrop Grumman's commercial resupply missions at:


-end-

Last Updated: Sept. 10, 2019
Editor: Sean Potter

tnt22

Цитировать NASA Wallops‏ Подлинная учетная запись @NASA_Wallops 3 сент.

Welcome to Wallops, Cygnus!

A @NorthropGrumman Antares rocket is scheduled to launch the Cygnus cargo spacecraft to the @Space_Station from Wallops Island, VA. Stay tuned for details!



tnt22

https://www.nasa.gov/content/upcoming-elana-cubesat-launches
ЦитироватьUpcoming ELaNa CubeSat Launches

ELaNa 25
Date:  NET October 21, 2019
Mission:  NG-12 – Antares II, Wallops Flight Facility, Va.
15 CubeSat Missions scheduled to be deployed[/COLOR]
    [/li]
  • Argus – St. Louis University, Missouri
  • AzTechSat-1 – NASA Ames Research Center, Moffett Field, California
  • CAPSat – University of Illinois at Urbana – Champaign
  • CryoCube – NASA Kennedy Space Center, Florida
  • CySat-1 – Iowa State University, Ames
  • HARP – University of Maryland, Baltimore County, Maryland
  • NEUTRON-1 – University of Hawaii, Manoa
  • Phoenix – Arizona State University, Tempe
  • RadSat-U – Montana State University, Bozeman
  • SOCRATES – University of Minnesota, Minneapolis
  • SORTIE – ASTRA, Boulder, Colorado
  • SPOC – University of Georgia, Athens
  • TJREVERB – Thomas Jefferson High School, Alexandria, Virginia
External Cygnus Deployments
    [/li]
  • HuskySat – University of Washington, Seattle
  • SwampSat II – University of Florida, Gainesville

tnt22

https://ria.ru/20190910/1558510223.html
ЦитироватьНАСА подтверждает планы отправить корабль Cygnus к МКС в октябре
06:11 10.09.2019

ВАШИНГТОН, 10 сен – РИА Новости. НАСА подтверждает, что запуск американского грузового корабля Cygnus на Международную космическую станцию состоится не раньше 21 октября.

В августе источник в российской ракетно-космической отрасли сообщил РИА Новости, что запуск к МКС следующего грузовика Cygnus намечается на 21 октября.

Грузовой корабль, принадлежащий компании Northrop Grumman, должен стартовать с космодрома Валлопс в штате Виргиния на ракете Antares. Старт, как сообщает НАСА, "состоится не раньше 14:39 по времени Восточного побережья США 21 октября".

Грузовик доставит на орбиту предметы первой необходимости и материалы для научных экспериментов, в том числе специальный жилет для защиты от космической радиации AstroRad Vest. Как сообщили в НАСА, экипажу МКС предстоит испытать его, в частности, рассказать, насколько он удобен в применении. Предполагается, что "новинка" впоследствии может быть использована в ходе миссий на Луну и Марс.

Кроме того, Cygnus доставит на станцию экспериментальный духовой шкаф Zero-G Oven, предназначенный для приготовления пищи в условиях гравитации. Он также в последующем может применяться в ходе длительных космических миссий. Еще один эксперимент, который называется The Made in Space Recycler, по информации НАСА, касается переработки в космосе пластика для использования в качестве материала для орбитальных 3D-принтеров.

Как отмечают в НАСА, предстоящий полет станет первой миссией Cygnus в рамках второго контракта на доставку грузов на МКС. В отличие от предыдущих миссий Cygnus, на предстоящем рейсе он впервые доставит на орбиту "скоропортящиеся грузы", которые должны пройти загрузку в корабль не раньше, чем за 24 часа до старта.
Прим. В оригинале НАСА - "in microgravity" - в условиях микрогравитации

tnt22

Цитировать Stephen Clark‏ @StephenClark1 5 ч. назад

Launch of the Cygnus space station resupply mission is set for Oct. 21 aboard the first Antares 230+ booster, which has been modified to support higher thrust settings on the first stage's RD-181 engines.
Цитировать NASA Wallops ‏Подлинная учетная запись @NASA_Wallops 5 ч. назад

Pit stop! Gotta get some gas.

@NorthropGrumman's Cygnus cargo spacecraft traveled to its temporary storage on NASA's Wallops Island to get fueled up before launch to the @Space_Station.


tnt22

https://ria.ru/20190928/1559225113.html
ЦитироватьИсточник: октябрьский старт к МКС корабля Cygnus отложили на неделю
01:02 28.09.2019

МОСКВА, 28 сен - РИА Новости. Запуск следующего американского грузового корабля Cygnus на Международную космическую станцию (МКС) ракетой-носителем Antares с российскими двигателями, который намечался на 21 октября, отложен на 29 октября, сообщил РИА Новости источник в ракетно-космической отрасли.

Ранее НАСА сообщило, что старт Cygnus, изготовленного компанией Northrop Grumman по заказу НАСА, с космодрома "Уоллопс" (штат Вирджиния) планируется на 21 октября в 21.39 мск.

"Запуск корабля Cygnus перенесен на 29 октября", - сказал собеседник агентства, не уточнив причину задержки.

Ранее сообщалось, что грузовик доставит на орбиту предметы первой необходимости и материалы для научных экспериментов, в том числе специальный жилет для защиты от космической радиации AstroRad Vest. Как сообщили в НАСА, экипажу МКС предстоит испытать его, в частности рассказать, насколько он удобен в применении. Предполагается, что новинка впоследствии может быть использована в ходе миссий на Луну и Марс.

Кроме того, Cygnus доставит на станцию экспериментальный духовой шкаф Zero-G Oven, предназначенный для приготовления пищи в условиях гравитации. Он также может применяться в последующем в ходе длительных космических миссий. Еще один эксперимент, который называется The Made in Space Recycler, по информации НАСА, касается переработки в космосе пластика для использования в качестве материала для орбитальных 3D-принтеров.

Предстоящий полет станет, по данным НАСА, первой миссией Cygnus в рамках второго контракта на доставку грузов на МКС. В отличие от предыдущих миссий Cygnus, предстоящей рейс впервые доставит на орбиту "скоропортящиеся грузы", которые должны пройти загрузку в корабль не раньше, чем за 24 часа до старта.
В 2013-2019 годах к МКС были отправлены 12 грузовых кораблей Cygnus, из которых один в 2014 году не долетел до станции из-за аварии ракеты-носителя Antares. На первой ступени ракеты используются два двигателя РД-181 разработки российского НПО "Энергомаш".
[свернуть]

tnt22

Цитировать NASA Wallops‏ @NASA_Wallops 19 мин. назад

.@NorthropGrumman's CRS-12 mission to deliver cargo to the @Space_Station is now scheduled for no earlier than Nov. 2.

This NET date is reflective of the expected departure of @JAXA_en's HTV-8 cargo vehicle in October, as well as other station activities.


tnt22

Цитировать Chris G - NSF‏ @ChrisG_NSF 33 мин. назад

Launch on 2 November would be ~09:50 EDT (13:50 UTC) for a southeast trajectory out of @NASA_Wallops (Mid-Atlantic Regional Spaceport - MARS).
#NG12 @northropgrumman

tnt22

https://ria.ru/20191008/1559559648.html
ЦитироватьСтарт американского грузового корабля Cygnus к МКС отложили на ноябрь
21:11 08.10.2019 (обновлено: 21:17 08.10.2019)

МОСКВА, 8 окт - РИА Новости. Запуск следующего американского грузового корабля Cygnus на Международную космическую станцию (МКС) ракетой-носителем Antares с российскими двигателями перенесен с октября на ноябрь, сообщило НАСА.

Старт намечался на 21 октября. В конце сентября источник РИА Новости в российской ракетно-космической отрасли сообщил о переносе запуска на 29 октября.

Как отмечается в Twitter космодрома Уоллопс (штат Вирджиния), принадлежащего НАСА, старт корабля Cygnus к МКС теперь планируется не ранее 2 ноября. Это связано с ожидающимся в октябре уходом со станции японского грузового корабля "Конотори-8", а также другими работами на МКС.

Ранее сообщалось, что грузовик доставит на орбиту предметы первой необходимости и материалы для научных экспериментов, в том числе специальный жилет для защиты от космической радиации AstroRad Vest. Как сообщили в НАСА, экипажу МКС предстоит испытать его, в частности рассказать, насколько он удобен в применении. Предполагается, что новинка впоследствии может быть использована в ходе миссий на Луну и Марс.

Кроме того, Cygnus доставит на станцию экспериментальный духовой шкаф Zero-G Oven, предназначенный для приготовления пищи в условиях гравитации. Он также может применяться в последующем в ходе длительных космических миссий. Еще один эксперимент, который называется The Made in Space Recycler, по информации НАСА, касается переработки в космосе пластика для использования в качестве материала для орбитальных 3D-принтеров.

Предстоящий полет станет, по данным НАСА, первой миссией Cygnus в рамках второго контракта на доставку грузов на МКС. В отличие от предыдущих миссий Cygnus, предстоящий рейс впервые доставит на орбиту "скоропортящиеся грузы", которые должны пройти загрузку в корабль не раньше, чем за 24 часа до старта.

В 2013-2019 годах к МКС были отправлены 12 грузовых кораблей Cygnus, из которых один в 2014 году не долетел до станции из-за аварии ракеты-носителя Antares. На первой ступени ракеты используются два двигателя РД-181 разработки российского НПО "Энергомаш".
[свернуть]

zandr

ЦитироватьРИА Новости написал:
...экспериментальный духовой шкаф Zero-G Oven, предназначенный для приготовления пищи в условиях гравитации.
"микро" пропустили?!

tnt22

Цитироватьzandr написал:
"микро" пропустили?!
Первый раз что-ли? Подобное уже было #5. Уже лень на все их фокусы реагировать...

tnt22

К #1 - уточнено и исправлено

https://www.nasa.gov/press-release/nasa-invites-media-to-northrop-grumman-s-space-station-launch-from-virginia
Цитировать...
Northrop Grumman is targeting liftoff of its Antares rocket for no earlier than 9:59 a.m. EDT Nov. 2 from the Mid-Atlantic Regional Spaceport's Pad-0A at NASA's Wallops Flight Facility on Wallops Island in Virginia. This is the first mission under Northrop's Commercial Resupply Services-2 contract with NASA.
...

Last Updated: Oct. 9, 2019
Editor: Sean Potter

tnt22

К #4 - уточнено и исправлено, перечень КА сокращен

https://www.nasa.gov/content/upcoming-elana-cubesat-launches
ЦитироватьELaNa 25A

Mission:  NG-12 – Antares II, Wallops Flight Facility, VA
7 CubeSat Missions scheduled to be deployed
    [/li]
  • Argus-02 – St. Louis University, St. Louis, Missouri
  • HARP – University of Maryland, Baltimore, Maryland
  • Phoenix – Arizona State University, Tempe, Arizona
  • RadSat-U – Montana State University, Bozeman, Montana
  • SOCRATES – University of Minnesota, Minneapolis, Minnesota
External Cygnus Deployments
    [/li]
  • HuskySat I – University of Washington, Seattle, Washington
  • SwampSat II – University of Florida, Gainesville, Florida

tnt22

Цитировать Chris G - NSF‏ @ChrisG_NSF 60 мин. назад

#NASA confirms launch times for #Cygnus #NG12 mission to Space Station.

2 November at 09:59 EDT (13:59 UTC)
3 November at 08:37 EST (13:37 UTC)
Those times are not a typo and are in fact only 22 minutes apart UTC time. The US clocks change on the morning of 3 November.

tnt22

ЦитироватьScientific Investigations Set for Space on Northrop Grumman CRS-12

 NASA Johnson

16 окт. 2019 г.

A Northrop Grumman Cygnus spacecraft scheduled to liftoff in early November will carry supplies and scientific experiments to the International Space Station. The investigations making the trip range from research into human control of robotics in space to reprocessing materials for 3D printing.
https://www.youtube.com/watch?v=OmIdSFMKZmAhttps://www.youtube.com/embed/OmIdSFMKZmA (2:13

tnt22

https://www.nasa.gov/mission_pages/station/research/news/ng12-research/
ЦитироватьOct. 16, 2019

Research launching to the space station ranges from radiation protection to rover control

Supplies and scientific experiments ride to the International Space Station on a Northrop Grumman Cygnus spacecraft (NG-12) scheduled for launch on Nov. 2. The investigations making the trip range from research into human control of robotics in space to reprocessing fibers for 3D printing. Cygnus lifts off on the Antares rocket from pad 0A at NASA's Wallops Flight Facility on Wallops Island in Virginia.

Resupply missions from U.S. companies ensure NASA's capability to deliver critical science research to the space station and significantly increase its ability to conduct new investigations in the only laboratory in space. This is the first mission under Northrop's Commercial Resupply Services-2 contract with NASA.

Here are some of the scientific investigations NG-12 delivers to the space station:

More Probing of Mysteries of the Universe

Stars, planets and the molecules of which they are made represent only about 15 percent of the mass content of the universe. The rest is dark matter. However, no one has ever seen this material or been able to study it directly. The Alpha Magnetic Spectrometer - 02 (AMS-02) has been looking for evidence of this mysterious substance from the vantage point of the International Space Station since 2011. AMS consists of an international team from 16 countries under the sponsorship of the U.S. Department of Energy's Office of Science.


View of the Alpha Magnetic Spectrometer - 02 (AMS-02) on the outside of the space station, taken during an Expedition 50 extravehicular activity (EVA).
Credits: NASA

NG-12 carries components needed for prolonging the operational life of AMS-02. In a series of spacewalks planned for later this year, astronauts will update the instrument, including cutting and reconnecting fluid lines in space for the first time.

Driving a Rover on the Ground from Space

Future missions to the Moon, Mars and other celestial bodies are likely to involve landing robotic explorers to "test the waters" on uncharted planets before sending humans. ANALOG-1, part of a European Space Agency initiative, tests communications, operations and control strategies for robots. Previous studies have shown that humans experience degraded sensorimotor functions in microgravity that could affect their operation of a robot. The space station makes it possible to investigate these issues under true microgravity conditions by having crew members in space control a rover on Earth. Maneuvers include selection, collection and storage of geologic samples with a multi-purpose robotic arm and navigating the rover along a defined path.

Testing Personal Protective Equipment for Astronauts


The AstroRad vest undergoes fit testing at the Kennedy Space Center before launching to the space station for astronaut evaluation of ease of use and comfort.
Credits: Lockheed Martin Space

Astronauts need protection from exposure to radiation, especially as they travel to the Moon and Mars. Unpredictable solar particle events, for example, could deliver, in just a few hours, a radiation dose high enough to cause serious health problems. The AstroRad Vest investigation tests a garment that shields specific, radiation-sensitive organs, tissues and stem cell concentrations, which could reduce the risk. Astronauts wear the garment while performing daily tasks and provide feedback such as how easy it is to put on, how it fits and feels, and the range of motion it allows.

3D Printing with Recycled Materials


The Made in Space Recycler hardware prepared for launch to the space station to test reprocessing plastic into 3D printing filament.
Credits: Made In Space, Inc.

Made in Space Recycler (MIS Recycler) tests systems for reprocessing plastic into 3D printing filament for creating new items in microgravity. It recycles polymers into filament for use in the Additive Manufacturing Facility, a 3D printer operating on the orbiting laboratory since 2016. The investigation looks at which materials process most effectively into 3D printing filament and which ones can be reprocessed many times without degrading. Researchers plan to analyze samples printed in space after they return to Earth and compare them to samples printed similarly on the ground.

Malting Barley in Microgravity

Barley contains antioxidants, vitamins and minerals. Malting converts starches from the raw grain into various sugars suitable for use in brewing, distilling and food production. Understanding how barley responds to microgravity could identify ways to adapt it for nutritional use on long-duration spaceflights. Malting ABI Voyager Barley Seeds in Microgravity tests an automated malting procedure and compares malt produced in space and on the ground for genetic and structural changes.

Faster, Cheaper Access to Space

NanoRacks-Craig-X FTP is a platform for several investigations, including a collaboration between Automobili Lamborghini and the Houston Methodist Research Institute that tests the performance of 3D-printed carbon fiber composites in the extreme environment of space. The materials are designed for use in aerospace applications, but results could replace lengthy and expensive carbon fiber manufacturing methods on Earth. In addition, the study may help improve the design of implantable devices for therapeutic drug delivery developed by Houston Methodist Research Institute.

Dinner, Fresh from the Oven


The specially-designed Zero-G Oven, a tool for examining heat transfer properties and the process of baking food in microgravity. Testing this oven on the space station may lead to the capability of preparing fresh-baked food on spacecraft for future deep space explorers.
Credits: Zero G Kitchen

Everyone enjoys the aroma of fresh-baked cookies, even astronauts. On future long-duration space missions, fresh-baked food could have psychological and physiological benefits for crew members, providing them with a greater variety of more nutritious meals. Zero-G Oven examines heat transfer properties and the process of baking food in microgravity. It uses a specially-designed toaster-like oven with a top temperature of 363.3 degrees Celsius or 685 degrees Fahrenheit.

Studying the Effect of Dark and Light on Liver Health

Microgravity as a Disruptor Of The 12-hour Circatidal Clock (Rodent Research-14) studies how disruptions to daily light cycles affect human cells and organs. Recent research shows that genes associated with 12-hour light and dark phases, or the 12-hour molecular clock, also are associated with the most common form of human liver disease. Liver disease contributes to insulin resistance and diabetes. The 12-hour clock's role in controlling proper liver function has major implications for maintaining human health. Results could provide insights into liver disease and reveal new therapies, including pharmaceuticals.

These are just a few of the hundreds of investigations currently happening aboard the orbiting laboratory.

Melissa Gaskill

International Space Station Program Science Office
Johnson Space Center


Last Updated: Oct. 16, 2019
Editor: Michael Johnson

tnt22

Предварительное расписание трансляций НАСА

https://www.nasa.gov/multimedia/nasatv/schedule.html
ЦитироватьNASA Television Upcoming Events

Watch NASA TV

ALL TIMES EASTERN U.S. TIME

NOVEMBER

November 1, Friday
11:30 a.m. – Northrop Grumman Cygnus CRS-12 "What's On Board" Briefing (All Channels)
2:30 p.m. - Northrop Grumman NG-12 Cygnus Cargo Craft Pre-Launch News Conference (All Channels)

November 2, Saturday
9:30 a.m. – Coverage of the Launch of the Northrop Grumman NG-12 Cygnus Cargo Craft Mission to the International Space Station; launch scheduled at 9:59 a.m. EDT – Johnson Space Center via Wallops Flight Facility, Virginia (All Channels)
TBD – Northrop Grumman NG-12 Cygnus post-launch news conference (All Channels)

November 4, Monday
4:15 a.m. – Coverage of the rendezvous and capture of the Northrop Grumman NG-12 Cygnus cargo craft at the International Space Station; capture scheduled at 5:45 a.m. EST (All Channels)
7:15 a.m. – Coverage of the installation of the Northrop Grumman NG-12 Cygnus cargo craft to the Unity Module of the International Space Station (All Channels)

tnt22


tnt22

https://www.nasa.gov/mission_pages/station/research/experiments/explorer/Investigation.html?#id=7759
ЦитироватьCraigX Flight Test Platform



NASA Image: JSC2019E052823 - Preflight imagery of the CraigX Flight Test Platform (NanoRacks-CraigX FTP). The investigation tests an array of material samples, several of which are additive manufactured materials, to determine the effects of the space environment for potential use in future space applications. In addition, testing of software defined radio technology is performed to asses possible commercial and military uses. The investigation also provides space for student-led experiments in support of the ISS National Lab's education objectives. Imagery courtesy of Craig Technologies.