What was used on the early R-7 warhead? I find a few sources, which do not seem to agree.
"Наиболее подходящим для наконечника и боковой поверхности ГЧ а то время был признан материал на основе кремнезема с органическим связующим - бакелитом. ...
Но тогда уже под руководством А. Северова, В. Бурлуцкого и В. Никулиной велся поиск защитного покрытия другого вида - асботекстолитового на органическом связующем. Головные части для последующих двух летных испытаний были изготовлены именно с его использованием. В конструкцию же наконечников изменения не вносились."
- Ракетно-космическая корпорация "Энергия" им. С.П. Королева. 1946-1996
R-5RD: "... испытаны также головные части с покрытием теплоизоляционной обмазкой на основе карбида кремния — ТО-2 (на трех ракетах) и с покрытием из асботекстолита (на двух ракетах). Работы выполнялись в интересах создания СУ для ракеты Р-7 ..."
- Решение «проблемы №1», Прудников И.С.,
"The coating was made of two layers of asbestos cloth on an asbotextolite base and impregnated with Bakelite. We called the coating material TO-2."
- Roads to Space, I.S. Prudnikov
There seems to be disagreement about what is TO-2. But "Roads to Space" is known to be a poor translation of "Дороги в космос". Is Дороги в космос online someplace?
Was the warhead tip silica in bakelite (or maybe silicon carbide in bakelite)? Everyone seems to agree the sides were made from asbestos textolite. I am assuming that the materials used in R-7 were the same as those tested on R-5RD.
ЦитироватьWhat was used on the early R-7 warhead?
I guess this may help:
http://cosmopark.ru/r7/tzp2.htm
ЦитироватьЦитироватьWhat was used on the early R-7 warhead?
I guess this may help:
http://cosmopark.ru/r7/tzp2.htm
Thanks, that is an interesting bit of history. But I think he is talking about early studies at NII-4 on evaporative heat shields. The R-5 shield was some kind of sublimating clay-based material, and the R-7 shield was an ablative shield.
I wish I could find
Дороги в космос online someplace.